Noova Saw by Noova
Oscillator 1 timbre
Only sawtooth oscillators are enabled, resulting in a harmonically rich content.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 111.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 26.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 94.52Hz (86).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 291.26Hz (75) and is modulated by Mod Wheel, Note Vel, VCF Env.
Mod Wheel mod-matrix 2 modulation amount for low-pass filter cut-off frequency is 85.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 121.
Low-pass filter envelope amount is modulated by Note Vel.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Filter has no resonance.
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±27 cents (139).
Oscillators drift level is manually set to 18. Drift rate is 77
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 150.
Reverse Reverb fx
not yet complete
Phase fx
not yet complete
Ambient Reverb fx
not yet complete
Flange & Reverb fx
not yet complete
Mod Wheel modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Cut-off Frequency | 85 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 121 |
| menu | VCF Envelope Velocity Sensitivity | 128 | |
| menu | VCA Envelope Velocity Sensitivity | 50 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.13s (128) |
| VCA Envelope Sustain Level | 99% (254) |
| VCA Envelope Release Time | 0.48s (82) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 121 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0.42s (71) |
| VCF Envelope Sustain Level | 0% (0) |
| VCF Envelope Release Time | 1.13s (128) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |